Women's knitted tunic Novita Wool Cotton

As low as €5.95

A soft touch of wool. This tunic is knitted with Novita Wool Cotton.
Novita Kevät 2018 -lehti (in Finnish)
6
Intermediate
Customize Women's knitted tunic Novita Wool Cotton

* Required Fields

Your Customization

    €5.95

    - +

    Availability: In stock

    N01186
    Size
    XS(S)M(L)XL(XXL)

    Yarn demand
    Novita Wool Cotton
    (010) Off-white 550(600)650(700)750(800) g

    Needles and other supplies
    Needles:
    Novita 3½ mm and
    4 mm or sizes needed to obtain gauge
    Circular needle:
    Novita 3½ mm (40 cm) for the neckline edge

    Designer
    Lea Petäjä

    The back

    Using the smaller needles, cast on 92(100)108(116)122(130) sts and work ribbing for 3 cm. Switch to the larger needles and work in stockinette st.

    When the piece measures 29(29)30(30)31(31) cm, decrease 1 st at both ends. Repeat the decreases every 10 cm for 2 more times = 86(94)102(110)116(124) sts.

    When the piece measures 66(67)68(69)71(72) cm, on every 2nd row bind off at both ends 1x4(5)5(6)6(6) sts and 3(4)3(4)4(4)x1 st for the armhole = 72(76)86(90)96(104) sts.

    On the next RS row, begin the lace pattern from row 1 of chart. The starting point for each size is marked with an arrow. Keep repeating the 26 st pattern repeat as needed. Work rows 2-12 of chart and then keep repeating rows 1-12.

    When the armhole measures 17(18)19(20)20(21) cm, bind off the middle 22(22)24(24)26(26) sts for the neckline. Work one side of the neckline at a time. On every 2nd row, bind off 1x2 sts and 1x1 st at the neckline edge.

    When the armhole measures 19(20)21(22)22(23) cm, bind off the remaining 22(24)28(30)32(36) shoulder sts.

    Knit the other side of the neckline to match.

    The front

    Work as you did the back, but leave the middle 14(14)16(16)18(18) sts on hold for the neckline when the armhole measures 9(10)11(12)12(13) cm. Work one side of the neckline at a time. On every 2nd row, bind off 1x3 sts, 1x2 sts and 2x1 st at the neckline edge.

    When the armhole measures 19(20)21(22)22(23) cm, bind off the remaining 22(24)28(30)32(36) shoulder sts.

    Knit the other side of the neckline to match.

    Sleeves

    Using the smaller needles, cast on 44(46)46(48)48(50) sts and work ribbing for 3 cm.

    Switch to the larger needles and begin the lace pattern from row 1 of chart. The midpoint of the sleeve is marked with an arrow at the bottom of the chart. Use that to determine the starting point for the pattern. Work rows 2-12 of chart and then keep repeating rows 1-12. Make sure the decreases and increases on the lace pattern match so that number of stitches remains correct at all times.

    When the piece measures 14(12)14(13)13(14) cm, increase 1 st at both ends. Repeat the increases every 3(3)2,5(2,5)2,5(2,5) cm for 10(11)13(14)14(15) more times = 66(70)74(78)78(82) sts. Work the lace pattern with the increased sts as well.

    When the piece measures 47(48)49(50)50(51) cm, bind off at both ends 1x4(5)5(6)6(6) sts and 4(5)5(6)6(6)x1 st on every 2nd row. Bind off the remaining sts.

    Knit the other sleeve to match.

    Finishing

    Lay the pieces to measurements, mist on the wrong side and allow to dry.

    Sew the shoulder seams.

    Neckline edge: Using the circular needle, pick up the sts on hold. Pick up additional sts from the neckline edge so that there are 96(98)100(102)104 sts in total. Begin picking up the sts from one of the shoulders. Work 3 cm of ribbing in the round and bind off in pattern.

    Attach the sleeves at the armholes following the red markers on the patern. Sew the sleeve seams and side seams.

    Finished dimensions
    body circumference 88(96)104(112)120(128) cm length 85(87)89(91)93(95) cm inner sleeve length 47(48)49(50)50(51) cm

    Stitch patterns & gauge
    Stitch patterns:
    - Ribbing:
    *k1, p1*, repeat *-* to end. On the wrong side rows, knit the knit stitches and purl the purl stitches.
    - Stockinette stitch:
    RS rows: knit all stitches.
    WS rows: purl all stitches.
    - Lace pattern:
    knit following the chart and the written instructions. Make sure the decreases and increases on the lace pattern match so that number of stitches remains correct at all times.
    - Ribbing in the round:
    *k1, p1*

    The back

    Using the smaller needles, cast on 92(100)108(116)122(130) sts and work ribbing for 3 cm. Switch to the larger needles and work in stockinette st.

    When the piece measures 29(29)30(30)31(31) cm, decrease 1 st at both ends. Repeat the decreases every 10 cm for 2 more times = 86(94)102(110)116(124) sts.

    When the piece measures 66(67)68(69)71(72) cm, on every 2nd row bind off at both ends 1x4(5)5(6)6(6) sts and 3(4)3(4)4(4)x1 st for the armhole = 72(76)86(90)96(104) sts.

    On the next RS row, begin the lace pattern from row 1 of chart. The starting point for each size is marked with an arrow. Keep repeating the 26 st pattern repeat as needed. Work rows 2-12 of chart and then keep repeating rows 1-12.

    When the armhole measures 17(18)19(20)20(21) cm, bind off the middle 22(22)24(24)26(26) sts for the neckline. Work one side of the neckline at a time. On every 2nd row, bind off 1x2 sts and 1x1 st at the neckline edge.

    When the armhole measures 19(20)21(22)22(23) cm, bind off the remaining 22(24)28(30)32(36) shoulder sts.

    Knit the other side of the neckline to match.

    The front

    Work as you did the back, but leave the middle 14(14)16(16)18(18) sts on hold for the neckline when the armhole measures 9(10)11(12)12(13) cm. Work one side of the neckline at a time. On every 2nd row, bind off 1x3 sts, 1x2 sts and 2x1 st at the neckline edge.

    When the armhole measures 19(20)21(22)22(23) cm, bind off the remaining 22(24)28(30)32(36) shoulder sts.

    Knit the other side of the neckline to match.

    Sleeves

    Using the smaller needles, cast on 44(46)46(48)48(50) sts and work ribbing for 3 cm.

    Switch to the larger needles and begin the lace pattern from row 1 of chart. The midpoint of the sleeve is marked with an arrow at the bottom of the chart. Use that to determine the starting point for the pattern. Work rows 2-12 of chart and then keep repeating rows 1-12. Make sure the decreases and increases on the lace pattern match so that number of stitches remains correct at all times.

    When the piece measures 14(12)14(13)13(14) cm, increase 1 st at both ends. Repeat the increases every 3(3)2,5(2,5)2,5(2,5) cm for 10(11)13(14)14(15) more times = 66(70)74(78)78(82) sts. Work the lace pattern with the increased sts as well.

    When the piece measures 47(48)49(50)50(51) cm, bind off at both ends 1x4(5)5(6)6(6) sts and 4(5)5(6)6(6)x1 st on every 2nd row. Bind off the remaining sts.

    Knit the other sleeve to match.

    Finishing

    Lay the pieces to measurements, mist on the wrong side and allow to dry.

    Sew the shoulder seams.

    Neckline edge: Using the circular needle, pick up the sts on hold. Pick up additional sts from the neckline edge so that there are 96(98)100(102)104 sts in total. Begin picking up the sts from one of the shoulders. Work 3 cm of ribbing in the round and bind off in pattern.

    Attach the sleeves at the armholes following the red markers on the patern. Sew the sleeve seams and side seams.


    Beginner

    Have you just learned to knit, maybe still trying to figure out the very basics like knit and purl stitches? Or are you picking up knitting again for the first time since elementary school? Start here.

    Technique

    Beginner-level patterns include only basic knitting techniques: knitting and purling. You’ll also need to cast on and cast off stitches. The projects can be worked flat or in the round. Easy, regular decreases are used. Most patterns are worked in stockinette or garter stitch. Other simple stitch patterns may occur, and they are always detailed in the written pattern. Stripes of different colours may be used, but no more advanced colourwork.

    Patterns

    All patterns are written and do not include charts. Abbreviations are not used. Getting gauge is not crucial to the finished piece. Patterns include mostly accessories such as scarved and beanies. Pillowcases and other home decoration pieces.

    Adventurous beginner

    Got the basics covered? You’d like to take a swing at your first pair of socks, perhaps some easy cables or colourwork? A treasure of patterns awaits you on this level.

    Technique

    Patterns on this level may include simple colourwork, cables or lace. Colourwork patterns repeats are relatively short, cables simple and symmetrical and lace patterns easy and relatively small, covering details rather than entire pieces. The colourwork, cable and lace stitches are not worked into decreases or increases. Colourwork yarn floats are short, max. 3-4 stitches. Picking up stitches may occur. On this level, you’ll also find easy patterns using domino knitting, log cabin knitting or tunisian crochet.

    Patterns

    Patterns may include simple charts. In case special techniques are employed, they are detailed our in the instructions, either as text or e.g. through videos. The patterns may also suggest ”shortcuts”, i.e. easier ways to accomplish a technique. Most of the basic socks with heel flaps or afterthought heels are on this level, as well as mittens with no-gusset thumbs. There’s also plenty of sweaters, usually yoke sweaters or raglan sleeve sweaters.

    Intermediate

    So knitting is a regular hobby for you? Abbreviations, charts and instructions are no more than a walk in the park? Perhaps you’re looking for something to challenge yourself with, even at the odds of frogging?

    Technique

    In addition to basic techniques, some special techniques may be employed on this level, e.g. short rows. The same pattern may include both lace and cables. Magic loop knitting or entrelac, two-coloured brioche stitch, also here. In general, patterns require a more advanced ability to "read" your knitting. Lace patterns are also more advanced than on the previous level, but the lace stitches are still worked on right side only. Intarsia may be included, but in relatively simple and symmetrical patterns.

    Patterns

    Patterns on this level can feature concurrent shaping, e.g. neckline shaping at the same time as sleeve decreases or sleeve decreases into cable pattern. Sweater sleeves may require more advanced shaping. Most of our sweaters are at this level. Other patterns include e.g. magic loop patterns and toe-up socks.

    Advanced

    Turn off that telly and lash the doors, maximum concetration required! Although this skill level doesn’t bring much more in terms of technique, there’s simply more going on at the same time. Skill, concentration and perception are requisite.

    Technique

    On this level, you’ll find more advanced intarsia patterns, including intarsia in the round. Brioche patterns with decreases and/or cables are also here. Beginning of rounds may shift and multiple markers are needed. Lace or cable stitches may be worked also from wrong side. We’ve also included patterns featuring steeks here. Steeking isn’t hard as such, but requires the nerves and confidence of an experienced knitter.

    Patterns

    Patterns may include complex steps and require simultaneous reading of both charts and written instructions. Gauge may vary over different steps of the project. The patterns often feature much details and a combination of techniques. The size of the project is not what determines whether it’s advanced or not; focus is on technique, overall complexity and the risk of errors during the project.

    Gauge and Swatching

    Every pattern is based on a certain gauge, expressed as stitches or rows per 10 cm. It is important that you make a swatch to check your gauge before you start the actual project. If your gauge doesn’t match the pattern’s gauge, your finished garment won’t be the correct size either.

    Swatching Start by knitting a swatch. Use the yarn, the needles and the stitch pattern you intend to use in the project. Make the swatch a little wider than 10 cm, so that you’ll be able to measure the stitches properly. Block the swatch by pinning it to a surface, then steam it gently. Count the stitches; put a pin in a stitch, then measure 10 cm from that stitch and put another pin there. Count the stitches from pin to pin – that’s your gauge! If needed, measure both horizontal and vertical gauge (rows). If you’re measuring rib or brioche stitches, stretch out the swatch slightly before measuring.

    Adjusting gauge

    If your gauge doesn’t match the pattern gauge, you can adjust it by switching needle size. If your swatch has too few stitches per 10 cm (i.e. your knitting is too loose), switch to smaller needles. Conversely, if your swatch has too many stitches per 10 cm, your knitting is too tight and you’ll need a larger pair of needles. Always knit another swatch in order to determine proper gauge and sizing. Also note that the pattern yardage only applies to the pattern yarn, the yardage may differ if you choose another yarn.

    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account