Novita 7 Veljestä Nature: Nuppu-Lace sweater

As low as €3.02

The Nuppu-lace sweater (Finnish for bobble) is like the promise of a new beginning. The light openwork pattern brings lightness to the turtleneck sweater, which is worked using Novita 7 Veljestä Nature yarn. Nuppu is worked in separate parts that are sewn together at the end.
Novita Kevät 2022 -lehti (in Finnish)
13
Intermediate
Customize Novita 7 Veljestä Nature: Nuppu-Lace sweater

* Required Fields

Your Customization

    €3.02

    - +

    Availability: In stock

    N012213
    Size
    XS(S/M)L/XL(2XL/3XL)

    Yarn demand

    Novita 7 Veljestä Nature

    (502) Daydream 550(600)700(800) g



    Needles and other supplies

    Needles: Novita 3.5 mm (US 4 / UK 10 or 9) and 4 mm (US 6 / UK 8) size ndls or needle size necessary to fit gauge and for the collar 1 short (40 cm / 16”) Novita circ. ndl size 3.5 mm (US 4 / UK 10 or 9)



    Designer
    Lea Petäjä

    Back

    CO 94(112)130(148) sts using the smaller size ndls and in the first WS row, start working 2/2 ribbing acc to chart I, row 1, as follows: k2, work patt rep of 18 sts 5(6)7(8) times, k2. Work rows 2-5 of chart.

    Change to the larger size ndls and work lace pattern starting from row 6 of chart I, as follows: k2, work patt rep of 18 sts 5(6)7(8) times, k2. Work rows 7-25 of chart, then rep rows 6-25.

    When work measures 39(40)42(44) cm/ 15.4(15.8)16.5(17.3)”, start armhole shaping, as follows: at the beg of the next 6 rows, BO 5 sts 2 times, 3 sts 2 times and 2 sts 2 times. Please note that in each pattern repeat of the lace pattern, for every pair of sts that are knitted together, a yarn over is also worked, so the number of sts remains the same. When 1 of the 2 sts to be worked tog has been bound off, do not make the decrease and work the rem st as k1. After decreasing there are 74(92)110(128) sts on the ndl.

    When armhole measures 18(19)21(22) cm / 7.1(7.5)8.3(8.7)”, place stitch markers on each side of the 34(38)38(38) center sts, for neckline shaping. At the beg of the next RS row, BO 6(7)10(10) sts for shoulder shaping, work in pattern to neckline-M, BO the next 34(38)38(38) sts for the neckline, and k to end of row. Turn work, BO the first 6(7)10(10) sts of the next WS row for the other shoulder and work in pattern to neckline. Place sts for right shoulder on hold and work left shoulder first. BO 2 more sts at neckline edge and for shoulder shaping, BO 4(6)8(11) sts in every 2nd row 3 times.

    Work the second shoulder in the same way.

     

    Front

    Work in the same way as described for back, until armholes measure 13(14)16(17) cm / 5.1(5.5)6.3(6.7)”. Place the 18(22)22(22) center sts on hold for neckline shaping and work each shoulder separately. At the beg of every 2nd row, at the neckline edge, BO 4 sts once, 3 sts once, 2 sts once and 1 st once.

    When armhole measures 18(19)21(22) cm / 7.1(7.5)8.3(8.7)”, BO 6(7)10(10) sts once and 4(6)8(11) sts 3 times in every 2nd row, for shoulder shaping.

    Work the second shoulder in the same way.

     

    Sleeves

    CO 54(56)58(60) sts, using the smaller size ndls and in the next WS row, start working 2/2 ribbing acc to chart II, row 1: k0(1)2(3) sts, work patt rep of 18 sts 3 times , k0(1)2(3) sts. Work rows 2-9 of chart.

    Change to the larger size ndls and continue working lace pattern acc to chart II, starting at row 10, as follows: k0(1)2(3) sts, work patt rep of 18 sts 3 times , k0(1)2(3) sts. Work rows 11-29, then rep rows 10-29.

    When work measures 8(11)11(9) cm / 3.2(4.3)4.33.5)”, inc 1 st at the beg and end of the row. Rep these inc’s every 3,5(3)2,5(2,5) cm / 1.4(1.2)1(1)” another 10(11)14(15) times = 76(80)88(92) sts. Work the increased sts in pattern.

    When work measures 46(47)48(49) cm / 18.1(18.5)18.9(19.3)”, at the beg of every row, BO 5(5)7(7) sts 2 times, 3 sts 4 times and 2 sts 4 times. BO the rem sts.

    Work the second sleeve in the same way.

     

    Finishing

    Place work inside out onto a flat surface, dampen and let dry. Close shoulder seams.

    Collar: place held sts back onto a circ. ndl and PUK more sts along neckline, so that there are 32(34)34(34) back-sts and 48(50)50(50) front-sts  = 80(84)84(84) sts. Work 2/2 ribbing in the round, until collar measures 15 cm / 5.9” , then BO all sts in pattern.

    Sew sleeves in armholes. Close side- and sleeve seams.

     

    Abbreviations

    acc = according

    beg = begin(ning)

    BO = bind off

    circ. = circular

    CO = cast on

    inc(‘s) = increase(s)

    k = knit

    M = marker

    ndl(s) = needle(s)

    p = purl

    patt = pattern

    pM = place marker

    psso = pass slipped stitch over

    PUK = pick up and knit

    rem = remaining

    rep = repeat

    RS = right side

    st(s) = stitch(es)

    WS = wrong side

    yo(‘s) = yarn over(s)

     

    Translations charts and legends:

    1 M re, in Rückreihe 1 M li = k1, p on WS

    1 M li, in Rückreihe 1 M re = p1, k on WS

    1 M wie zum Rechtsstricken abheben, 1 M re und die abgehobene M über die gestrickte M heben = slip 1 stitch knitwise, k1, pass slipped stitch over stitch just worked

    2 M re zusammenstricken = k2tog

    1 Umschlag auf die Nadel machen = yo

    Diagramm = Chart

    Reihen x-x wiederholen = Rep rows x-x

    18 M Musterrapport wiederholt sich = 18 sts pattern repeat

     

     

    Finished dimensions

    Finished measurements

    Bust circumference: 86(100)118(136) cm

    Total length: 59(61)65(68) cm

    Underarm length: 46(47)48(49) cm



    Stitch patterns & gauge

    Stitch patterns: Ribbing and cable pattern: work acc to written instructions and chart. 2/2 ribbing in the round: *k2, p2, rep from *.

    Gauge/Tension: 21,5 sts and 25 rows, worked in lace pattern using the larger size ndls = 10 x 10 cm / 4” gauge



    Back

    CO 94(112)130(148) sts using the smaller size ndls and in the first WS row, start working 2/2 ribbing acc to chart I, row 1, as follows: k2, work patt rep of 18 sts 5(6)7(8) times, k2. Work rows 2-5 of chart.

    Change to the larger size ndls and work lace pattern starting from row 6 of chart I, as follows: k2, work patt rep of 18 sts 5(6)7(8) times, k2. Work rows 7-25 of chart, then rep rows 6-25.

    When work measures 39(40)42(44) cm/ 15.4(15.8)16.5(17.3)”, start armhole shaping, as follows: at the beg of the next 6 rows, BO 5 sts 2 times, 3 sts 2 times and 2 sts 2 times. Please note that in each pattern repeat of the lace pattern, for every pair of sts that are knitted together, a yarn over is also worked, so the number of sts remains the same. When 1 of the 2 sts to be worked tog has been bound off, do not make the decrease and work the rem st as k1. After decreasing there are 74(92)110(128) sts on the ndl.

    When armhole measures 18(19)21(22) cm / 7.1(7.5)8.3(8.7)”, place stitch markers on each side of the 34(38)38(38) center sts, for neckline shaping. At the beg of the next RS row, BO 6(7)10(10) sts for shoulder shaping, work in pattern to neckline-M, BO the next 34(38)38(38) sts for the neckline, and k to end of row. Turn work, BO the first 6(7)10(10) sts of the next WS row for the other shoulder and work in pattern to neckline. Place sts for right shoulder on hold and work left shoulder first. BO 2 more sts at neckline edge and for shoulder shaping, BO 4(6)8(11) sts in every 2nd row 3 times.

    Work the second shoulder in the same way.

     

    Front

    Work in the same way as described for back, until armholes measure 13(14)16(17) cm / 5.1(5.5)6.3(6.7)”. Place the 18(22)22(22) center sts on hold for neckline shaping and work each shoulder separately. At the beg of every 2nd row, at the neckline edge, BO 4 sts once, 3 sts once, 2 sts once and 1 st once.

    When armhole measures 18(19)21(22) cm / 7.1(7.5)8.3(8.7)”, BO 6(7)10(10) sts once and 4(6)8(11) sts 3 times in every 2nd row, for shoulder shaping.

    Work the second shoulder in the same way.

     

    Sleeves

    CO 54(56)58(60) sts, using the smaller size ndls and in the next WS row, start working 2/2 ribbing acc to chart II, row 1: k0(1)2(3) sts, work patt rep of 18 sts 3 times , k0(1)2(3) sts. Work rows 2-9 of chart.

    Change to the larger size ndls and continue working lace pattern acc to chart II, starting at row 10, as follows: k0(1)2(3) sts, work patt rep of 18 sts 3 times , k0(1)2(3) sts. Work rows 11-29, then rep rows 10-29.

    When work measures 8(11)11(9) cm / 3.2(4.3)4.33.5)”, inc 1 st at the beg and end of the row. Rep these inc’s every 3,5(3)2,5(2,5) cm / 1.4(1.2)1(1)” another 10(11)14(15) times = 76(80)88(92) sts. Work the increased sts in pattern.

    When work measures 46(47)48(49) cm / 18.1(18.5)18.9(19.3)”, at the beg of every row, BO 5(5)7(7) sts 2 times, 3 sts 4 times and 2 sts 4 times. BO the rem sts.

    Work the second sleeve in the same way.

     

    Finishing

    Place work inside out onto a flat surface, dampen and let dry. Close shoulder seams.

    Collar: place held sts back onto a circ. ndl and PUK more sts along neckline, so that there are 32(34)34(34) back-sts and 48(50)50(50) front-sts  = 80(84)84(84) sts. Work 2/2 ribbing in the round, until collar measures 15 cm / 5.9” , then BO all sts in pattern.

    Sew sleeves in armholes. Close side- and sleeve seams.

     

    Abbreviations

    acc = according

    beg = begin(ning)

    BO = bind off

    circ. = circular

    CO = cast on

    inc(‘s) = increase(s)

    k = knit

    M = marker

    ndl(s) = needle(s)

    p = purl

    patt = pattern

    pM = place marker

    psso = pass slipped stitch over

    PUK = pick up and knit

    rem = remaining

    rep = repeat

    RS = right side

    st(s) = stitch(es)

    WS = wrong side

    yo(‘s) = yarn over(s)

     

    Translations charts and legends:

    1 M re, in Rückreihe 1 M li = k1, p on WS

    1 M li, in Rückreihe 1 M re = p1, k on WS

    1 M wie zum Rechtsstricken abheben, 1 M re und die abgehobene M über die gestrickte M heben = slip 1 stitch knitwise, k1, pass slipped stitch over stitch just worked

    2 M re zusammenstricken = k2tog

    1 Umschlag auf die Nadel machen = yo

    Diagramm = Chart

    Reihen x-x wiederholen = Rep rows x-x

    18 M Musterrapport wiederholt sich = 18 sts pattern repeat

     

     


    Beginner

    Have you just learned to knit, maybe still trying to figure out the very basics like knit and purl stitches? Or are you picking up knitting again for the first time since elementary school? Start here.

    Technique

    Beginner-level patterns include only basic knitting techniques: knitting and purling. You’ll also need to cast on and cast off stitches. The projects can be worked flat or in the round. Easy, regular decreases are used. Most patterns are worked in stockinette or garter stitch. Other simple stitch patterns may occur, and they are always detailed in the written pattern. Stripes of different colours may be used, but no more advanced colourwork.

    Patterns

    All patterns are written and do not include charts. Abbreviations are not used. Getting gauge is not crucial to the finished piece. Patterns include mostly accessories such as scarved and beanies. Pillowcases and other home decoration pieces.

    Adventurous beginner

    Got the basics covered? You’d like to take a swing at your first pair of socks, perhaps some easy cables or colourwork? A treasure of patterns awaits you on this level.

    Technique

    Patterns on this level may include simple colourwork, cables or lace. Colourwork patterns repeats are relatively short, cables simple and symmetrical and lace patterns easy and relatively small, covering details rather than entire pieces. The colourwork, cable and lace stitches are not worked into decreases or increases. Colourwork yarn floats are short, max. 3-4 stitches. Picking up stitches may occur. On this level, you’ll also find easy patterns using domino knitting, log cabin knitting or tunisian crochet.

    Patterns

    Patterns may include simple charts. In case special techniques are employed, they are detailed our in the instructions, either as text or e.g. through videos. The patterns may also suggest ”shortcuts”, i.e. easier ways to accomplish a technique. Most of the basic socks with heel flaps or afterthought heels are on this level, as well as mittens with no-gusset thumbs. There’s also plenty of sweaters, usually yoke sweaters or raglan sleeve sweaters.

    Intermediate

    So knitting is a regular hobby for you? Abbreviations, charts and instructions are no more than a walk in the park? Perhaps you’re looking for something to challenge yourself with, even at the odds of frogging?

    Technique

    In addition to basic techniques, some special techniques may be employed on this level, e.g. short rows. The same pattern may include both lace and cables. Magic loop knitting or entrelac, two-coloured brioche stitch, also here. In general, patterns require a more advanced ability to "read" your knitting. Lace patterns are also more advanced than on the previous level, but the lace stitches are still worked on right side only. Intarsia may be included, but in relatively simple and symmetrical patterns.

    Patterns

    Patterns on this level can feature concurrent shaping, e.g. neckline shaping at the same time as sleeve decreases or sleeve decreases into cable pattern. Sweater sleeves may require more advanced shaping. Most of our sweaters are at this level. Other patterns include e.g. magic loop patterns and toe-up socks.

    Advanced

    Turn off that telly and lash the doors, maximum concetration required! Although this skill level doesn’t bring much more in terms of technique, there’s simply more going on at the same time. Skill, concentration and perception are requisite.

    Technique

    On this level, you’ll find more advanced intarsia patterns, including intarsia in the round. Brioche patterns with decreases and/or cables are also here. Beginning of rounds may shift and multiple markers are needed. Lace or cable stitches may be worked also from wrong side. We’ve also included patterns featuring steeks here. Steeking isn’t hard as such, but requires the nerves and confidence of an experienced knitter.

    Patterns

    Patterns may include complex steps and require simultaneous reading of both charts and written instructions. Gauge may vary over different steps of the project. The patterns often feature much details and a combination of techniques. The size of the project is not what determines whether it’s advanced or not; focus is on technique, overall complexity and the risk of errors during the project.

    Gauge and Swatching

    Every pattern is based on a certain gauge, expressed as stitches or rows per 10 cm. It is important that you make a swatch to check your gauge before you start the actual project. If your gauge doesn’t match the pattern’s gauge, your finished garment won’t be the correct size either.

    Swatching Start by knitting a swatch. Use the yarn, the needles and the stitch pattern you intend to use in the project. Make the swatch a little wider than 10 cm, so that you’ll be able to measure the stitches properly. Block the swatch by pinning it to a surface, then steam it gently. Count the stitches; put a pin in a stitch, then measure 10 cm from that stitch and put another pin there. Count the stitches from pin to pin – that’s your gauge! If needed, measure both horizontal and vertical gauge (rows). If you’re measuring rib or brioche stitches, stretch out the swatch slightly before measuring.

    Adjusting gauge

    If your gauge doesn’t match the pattern gauge, you can adjust it by switching needle size. If your swatch has too few stitches per 10 cm (i.e. your knitting is too loose), switch to smaller needles. Conversely, if your swatch has too many stitches per 10 cm, your knitting is too tight and you’ll need a larger pair of needles. Always knit another swatch in order to determine proper gauge and sizing. Also note that the pattern yardage only applies to the pattern yarn, the yardage may differ if you choose another yarn.

    Write Your Own Review
    Only registered users can write reviews. Please Sign in or create an account